Connexions de profilés TekSpan
TekSpan’s versatility as a support frame is well-known and proven – but are you aware of the many ways to connect services to the TekSpan profile? Let’s take a look here at just how simple this superb frame system is to connect to.
1. Threaded Rod Connectors
Drawing on the same principle as the TekSpan T-lock, the threaded rod connector simply locks into the profile slots and offers a direct-to-profile connection for suspension of threaded rods. Simply insert the connector T-section, apply a quarter-turn, and tighten by hand / with a spanner. Choose from M10 / M12 M 16 options.
2. Rod-through-profile
It’s simple but effective; install an M10 or M12 threaded rod right through both sides of the profile and secure each side with a square plate washer and hex nut to create a strong and secure suspension rod.
3. Direct to channel
Want to use standard channel / Unistrut in conjunction with TekSpan? Then simply use the T-lock bolt with heavy plain washer to direct-connect. That way you can build a superstructure using the TekSpan frame, and a lighter gauge channel system for the internal parts of the frame, and what’s more, you can easily fit standard channel brackets to TekSpan too, further maximising it’s versatility.
French 
English 
German 
Spanish 
Portuguese